Not all plumbing parts and fixtures are created equally. The stuff from big box stores and online is not all the same. Often times products have been created to hit …
Plumbing problems are common phenomena. We all face them in our day-to-day lives. It is not affordable to call a plumber every time we face a problem. With the help of little knowledge and necessary tools, we can fix them. Insufficient heat in a space and unpleasant odors are the common issues households face in winters.
There are several factors that can contribute to the problem of not having enough hot water. Let us discuss some of the possible reasons stopping your heating system to produce the desired level of heating.
First, upgradations of a tub to a bigger one will increase the demand for hot water that drops the water temperature. Second, high flow showerheads can empty hot water tank quickly. Third, Distance from a faucet to the water heater does matter. If hot water has to travel a longer distance to reach faucet, it will decrease the temperature of water.
There are also some external factors that can cause this problem. If the surrounding environment of your premise is extremely cold, it will take water heater longer time to heat up water. Consequently, it would feel like there is an insufficient volume of heated water in faucets.
Problematic equipment is a common reason why households do not get their desired level of hot water. If you have set the thermostat at low, it will prevent heater to heat up the larger quantity of water. Temperature somewhere between 120-140 Fahrenheit is considered to be normal. You should also look whether or not the size of your water heater tank is compatible with your hot water needs. If your house is too big for a small size water heater, consider replacing it with a larger one.
The manufacturers usually set the thermostat. However, you can change it according to your needs. You can replace the thermostat if it is faulty. If you think your water heater needs to be replaced, you can do it yourself. Here are some instructions to replace a water heater.
- Turn off the power and water supply before doing anything else. If it is a gas heater, shut off the gas supply.
- Empty the water tank by draining out water. You can open up the bottom valve to do it quickly.
- Disconnect water lines and power cables or gas connection attached with the water heater.
- Once you clear the older unit, replace it with the new one and connect water lines and power source. Make sure the process of connecting cables and pipes is reliably done. Check the gas connections properly for leaks.
You can always get assistance from a qualified plumber. If you do not have proper tools, you had better call a plumber to fix your plumbing issues.
Buying a home is an important decision. It is one that requires the sound advice of an appraiser and inspector so that expensive repairs can be avoided or negotiated into the price. The most common issues are rarely overlooked. Even inexperienced home buyers will notice cracks due to sunken foundations, uneven floors, squeaky baseboards, and condition of the roof. Even the internal systems such as the HVAC system and appliances are easily noticed. However, many seem to forget to get the plumbing inspected, especially the septic and sewer system. Here are 5 important things that happen during a sewer line inspection.
1. Accessing the sewer pipes
The sewer system is a very important aspect of the home. A properly functioning system allows for the proper flow of sewage and allows for a functioning septic system. If the line is damaged, ruptured, or clogged, it can cause a back up of the entire septic system causing a more than inconvenient problem that could take days to be fixed. The repairs for these types of issues are expensive and can sometimes require the yard and landscape to be dug up.
2. Using new fiber optic and camera technology
Before we had micro cameras and fiber optic systems, yards had to be dug up and lines had to be manually inspected by eye. This was labor intensive, expensive, and very invasive. Now, a technician can feed a small camera that is connected to a thin cord or fiber optic connection. The camera is remotely controlled and using a small light or infra red the inside of the piping can be thoroughly inspected.
3. Look for invasive tree roots
One of the most common issues with older homes is invasive tree roots. In older neighborhoods as the trees grow and add to the beauty of the neighborhood, concurrently they are wrecking havoc on the underground piping. Tree roots can bend the piping which causes it to pinch in certain spots. A strong and large tree root can totally rip and tear apart the sewer and septic lines causing expensive damage.
4. Old pipes are located
During the inspection, old and corroded pipes are located and mapped out on a grid. The entire sewer line is inspected and once completed the technician can create a plan for repair or replacement. Using the information from the inspection a complete repair and installation plan can be recommended, verified by camera footage.
Clogs are regularly discovered during inspections. Clogs can occur due to unflushable debris and build up in the sewer lines. Clogs can sometimes be cleared with other devices but the issue may simply be solved with repair and installation of new piping.
Don’t take the plumbing system for granted when choosing a new home. Make sure to have the sewer lines and plumbing inspected by quality specialists.
Watch more Basic Plumbing videos: http://www.howcast.com/videos/513663-3-Tips-on-How-to-Buy-Plumbing-Fixtures-Basic-Plumbing At the risk of having a …
Ask This Old House plumbing and heating expert Richard Trethewey and host Kevin O’Connor discuss the different ways to identify water-saving plumbing …
In this episode of #BOHNAFIDE, I am at the Splashes Bath & Kitchen showroom in Vancouver with one of my favourite reps, Seda! Today is all about choosing …
Utilities can be the be all and end all of societies. Going back to the days of the Roman Empire, development in plumbing was one of the reasons their civilization was able to flourish for as long as it did. Aside from their incredible plumbing, they also took the time to improve and repair their utilities in the event that they ever failed to operate in full quality. This is exactly how you have to look at your own utilities. You live in a proverbial Roman Empire, and even though it’s nowhere near the size of the Roman Empire in its hey-day you want your utilities to be top-tier and working properly. We’re not only going to show you how to properly assess the quality of your utilities, but we’re also going to show you what you can do about it if you want to take action and improve your utilities into something much better than what they are.
Finding the Right People for the Job
Before you can even go ahead with fixing your problem, it’s important to find someone has an expertise in plumbing and plumbing replacement. Typically, the people whom you’d want to seek out to execute this sort of work would be plumbers or utility repairmen. While people would assume they are one and the same, especially if they’re looking for boiler replacement in Regional Area, the reality is that there is a fine line between a legitimate repairman and a plumber. Plumbers, while highly skilled and accredited are specialists when it comes to plumbing. It sounds obvious, but people often assume that plumbers can take care of washing machines just because they deal with water. Plumbers specialise in pipes, movement of water, and they are also good with ensuring that septic tanks and other valuable parts of a house are in full working order. Once you find the right person, make sure they know how to provide a proper assessment.
Assessing Someone’s Assessment
Even though you’re not a plumbing expert, or know how to take care of bathroom installations, you can still find other professionals to double-check the work that provided to you with services if you have any doubt. Besides looking for plumbers in local area, be sure to look for other individuals that can provide you with a second opinion. These individuals would ideally double-check the work someone else did, and assuming the original job was done in good fashion, no further work will be needed.
Very few people think about their plumbing systems until there seems to be a problem somewhere. This is one of the most important systems in your home or property and you need to do everything possible to keep it in top condition so you can avoid costly repairs and replacements. A good plumber can inspect and maintain your plumbing and also conduct any necessary repairs and replacements even on an emergency basis. But using simple care tips, you will greatly reduce the number of time you actually need a plumber to come to your rescue.
Tip 1 – Minimize grease build up in your kitchen sink by using a strainer to catch the greasy items and dispose in garbage instead of running them down the drain. To keep the same problem on the low, consider running hot water down the kitchen drain so you are able to get rid of any existing grease and soap buildup.
Tip 2 – Avoid letting hair down your bathroom drain. This is among the things that bring in plumbing issues in the bathroom and you can prevent by being cautious with what finds its way down the drain. A wet-dry vacuum can come in handy in grabbing any mess that could be around the drainage surface before it finds its way down your line causing problems with your plumbing system.
Tip 3 – Be careful with draining chemicals down your toilet, or sinks around the home. You may not think it is damaging, but there are chemicals that are too harsh and end up eating away at your pipes causes damages and leaks. Find a better way of disposing any chemicals, including caustic chemicals so you do not end up damaging your plumbing and putting yourself up for costly replacements and repairs.
Tip 4 – Have old pipes on your system replaced. This is especially important when you are moving into an old house that may have been remodeled. Remember that materials that were used a few years ago are not as durable and quality as those available today. A replacement project before any problems show up may be a very good idea instead of waiting until you start having one issue after another with the old pipes.
Tip 5 – Always prepare for the weather. For instance, before winter sets, try and winterize the plumbing so it is able to withstand the extreme cold conditions. The heating in your home should also be updated and functional. You will save yourself from so many common issues when you are able to keep your pipes from freezing. If you are not sure how to go about this, let your reputable plumber guide you.
Tip 6 – Keep an eye on your water heater. A leaky heater can cause you lots of problems so ensure that it is properly maintained. You can reduce the problems by draining it every season so there is no sediment that could lead to failure of your heater. The water pressure around the home should also be good enough so it does not become too much for the plumbing to handle.